Description
IP wall reader in standard format for integration of switch ranges with 55×55 mm cut-out. The IP wall reader enables access control via RFID medium or alternatively via PIN entry. A two-factor authentication is also possible. The SmartRelay module (PoE) forms the central unit with network connection. The administration takes place centrally through the integrated web server. The network relay module communicates with the IP wall reader via a bus connection. This can be easily mounted in the switch box or with surface-mounted housing (optional) inside the door.
The network relay module forms the central unit with network connection. It is mounted on the wall and supplied with power via PoE. The administration takes place centrally through the integrated web server; additional software is not required. The network relay module communicates with the IP wall reader via a BUS connection. This can be easily mounted in the switch box or with a surface-mounted housing (optional) in the door area. Practical: With the integrated PoE splitter, the door lock or door opener can be supplied with 24VDC directly from the reader module. This means that no further cables are required for power supply. The extension reader is also powered directly via the network relay module (KXP-2).
If several doors or additional rooms are to be integrated, the network relay modules can be connected by a master-slave mode to a system with central management.
